Hey guys just ran across this set up and was wondering if it would be good for Stabilizing wood. Seems like a good deal if it would work. Should I jump on this or look.for something else?
Read down at the bottom of the page and it might say for degassing if so it will not last long. Usual failure is the Plexiglas lid flexing under high vacuum and crazing. You should look for something with a glass lid that is in the 3/4" to 1" thick range https://www.amazon.com/Glass-Vac/b/...9100011&field-lbr_brands_browse-bin=Glass+Vac there is a Canadian supplier out of Quebec http://ledab.ca/vacuum-chambers/
