Princess Auto has G10 scales on sale https://www.princessauto.com/en/det...fibre-g10-forging-handle-material/A-p8934150e
I bought and received two of these. Good looking board. Silver weave. No holes or rounded corners like shown in the Princess Auto image. Definitely G10 as I started itching shortly after I opened the box. USA Knifemaker wants $214 for a similar 6" x 12" slab. Thanks @Vladimir for letting us know. Dan
I bought two too!!! I ground one corner a little to see what the layers looked like, it seemed ok at first look. I'm going to try it on some hunting knives out of 440C, should be a good combination it think.
Great find. I may have to visit princess auto later today. Does anyone know if the pattern is throughout the material or will it be washed away with grinding?
I'm not a 100% sure but it looked like there was only one silver layer on the outside and the rest of the layers are black carbon fiber. I just did a quick look though I could be wrong.
Scott, I'll take a scrape at it tonight and take a pic or two. To me it appears to be 1/8" twill silver, throughout. Something like this: https://www.masecraftsupply.com/G10-Silver-Twill-2-x-2-Weave-14-_p_3052.html Dan
Vladimir was correct. There are silver top layers and the rest is layers of black CF. I am not going to complain as they were on sale for $16.99 each. Dan
I popped in to have a look. They had everything in stock. I was surprised to see micarta as well. It was regular price so I may wait till it goes on sale again. https://www.princessauto.com/en/search?Dy=1&Nty=1&Ntt=micarts
