1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Hammer to Hawk

Discussion in 'Other Projects' started by FORGE, Jun 30, 2012.

  1. FORGE

    FORGE Maker of the Year Best Knife

    Likes Received:
    303
    Trophy Points:
    63
    I thought I would give this a try and forged a Hawk from an old ball peen hammer.

    [​IMG]

    [​IMG]
     
  2. Mythtaken

    Mythtaken Staff Member CKM Staff

    Likes Received:
    247
    Trophy Points:
    63
    Not much to say on this one, other than WOW!. Nice job. Great photos, too.
     
  3. Rob Holm

    Rob Holm New Member

    Likes Received:
    0
    Trophy Points:
    6
    Is that the one you started at the hammer-in?
     
  4. FORGE

    FORGE Maker of the Year Best Knife

    Likes Received:
    303
    Trophy Points:
    63
    Right you are, it is the hammer-in hawk.
     
  5. FORGE

    FORGE Maker of the Year Best Knife

    Likes Received:
    303
    Trophy Points:
    63
    Here is the finished Hawk.
    [​IMG]
     
  6. Rob Holm

    Rob Holm New Member

    Likes Received:
    0
    Trophy Points:
    6
    Looks good!
     
  7. knottysticks

    knottysticks New Member

    Likes Received:
    1
    Trophy Points:
    8
    Wow - a good looking hawk
     

Share This Page